mh_rms scrie:vreau si eu codurile am un leon 1.9 tdi 2001

clima.. .si vreau si eu codurile sa incerc pls..
CODES TO SEE THE ADDITIONAL INFORMATION IN THE CLIMATRONIC BI-ZONE
How to activate
Start the car.
Press the ECON button and simultaneously press the “air upwards” button.
Stop pressing both buttons
Press “Temperature +” and “Temperature – “ this will move us in the main channels (29)
With “Ventilation +” and “Ventilation –“ we move in the secondary channels (29,1)
Press Econ to return to the normal functionality of the climate control.
Part of the possible codes:
* 1.0: Interior Temperature Centigrade (1.1 Temperature at the feet, 1.2 Temperature by the ceiling, the sensor is behind the grill)
* 4.0: Exterior Temperature Sensor 1, in Centigrade
* 4.2 Exterior Temperature Sensor 2, in Centigrade
* 19.0 Speed in km/h, in paces of 1km/h (10% less than indicated in the speed dial)
* 19.1 Engine Temperature
* 19.2 Spin Regime of the engine x100
Simultaneously regulate both zones of the Climatronic
Press for 2 or 3 seconds the AUTO button, this will activate the “AUTO” module so that the temperature sensor of the driver can regulate both areas. This is deactivated by pressing one of the buttons that regulates the passengers temperature.
Automatic Regulation of the volume according to the speed
1)Regulate the volume to the preferred level at a certain speed (for example 8 at 50km/h)
2)Enter the “prog” mode of the radio and select “scv”
3)Regulate the sensibility of the control (with the volume command) to low, medium or high.
4) Don’t use the volume manually again, or this will deactivate the automatic system.